Practical, plain-English guides written for contractors, fabricators and site engineers working with plastic welding equipment and geomembranes in the UAE, GCC and Africa. Every machine and material referenced in these guides is available from us as a welding machine and geomembrane supplier in Dubai.
Supplier types explained, a vetting scorecard, eight suppliers reviewed one by one, price drivers and emirate-by-emirate delivery notes.
Read the comparison →
Extruders, wedge welders and hot air tools mapped by job and material thickness — shortlist in four steps.
Read the guide →
Welding from 0.05 mm — why thin material needs its own machine, workable settings and the four failures to avoid.
Read the guide →
Where the premium Weldy heat gun shines in daily Gulf use, what to know before ordering, and the honest verdict.
Read the review →
From unboxing to passing seams — pre-start checks, settings, trial seams, air testing and daily care.
Read the guide →
How the Weldy hand extruder family fits together, and why the EX3 is the Gulf workhorse.
Read the guide →
Elements, carbon brushes, shoes and wedges — wear symptoms and the spares kit every crew should carry.
Read the guide →
Why control beats wattage, how hot is hot enough, and the 7-point professional checklist.
Read the checklist →
The working principle of a hand extruder, what extrusion welders are used for, choosing welding rod, and how they compare with hot air and wedge welding.
Read the guide →
Which machine handles which seam on a lining project — long panels, patches, penetrations — and how each weld type is tested.
Read the comparison →
From tarpaulin to TPO roofing to geomembrane detail work — how to pick nozzles, set temperatures and get clean hot air welds.
Read the guide →
A buyer's checklist: thickness and certification, roll logistics, welding compatibility, and why liner and machines should come from one source.
Read the checklist →
Rod sizes 3.0–4.5 mm, grade matching, consumption per 100 m² and the storage habits that stop porosity and failed peel tests.
Read the guide →
From poor subgrade to skipped trial seams — the short list behind almost every leaking pond, and how to avoid each one.
Read the checklist →
Melt vs preheat temperature, surface grinding, running the bead and the daily trial-seam habit that keeps peel tests passing.
Read the guide →
The heat–speed–pressure triangle, the trial seam procedure, reading squeeze-out, and air-testing the finished dual-track seam.
Read the guide →
Hot air welding for single-ply roofs — workable settings, the peel test, and the four failures inspectors find most.
Read the guide →